Network Switches for SoundGrid Systems






 
Certified Network Switch
etc
1Cisco SG300-10PP 
2Cisco SG250-08 8-Port Gigabit Smart Switch 
3Cisco SG250-08HP 8-Port Gigabit PoE Smart Switch 
4HP1920-8G (JG920A) 8-port switch 
5HP 1410-16G (J9560A) 16-port switch 
6HP 1410-8G (J9559A) 8-port switch 
7HP 1405-5G (JD869A) 5-port switch 
8HP ProCurve 1810-24G (J9450A) 24-port switch 
9NETGEAR GS510TLP 10 port switch LAG (Link Aggregation Group) feature is supported and can be used for a redundant connection between network switches (of the same model).
10NETGEAR Prosafe M4100-D12G LAG (Link Aggregation Group) feature is supported and can be used for a redundant connection between network switches (of the same model).
11NETGEAR M4250 SeriesLAG (Link Aggregation Group) feature is supported and can be used for a redundant connection between network switches from this series.
12TP-Link TL-SG1016 (v10.0) 16-port switch 
13Luminex GigaCore 10 10-Port SwitchLink Redundancy (RLinkX) is supported with SoundGrid. Link Aggregation (MultiLinkX) is not supported with SoundGrid.LinkX) is not supported with SoundGrid.
14Luminex GigaCore 16Xt 16-Port SwitchLink Redundancy (RLinkX) is supported with SoundGrid. Link Aggregation (MultiLinkX) is not supported with SoundGrid.LinkX) is not supported with SoundGrid.
 
 
Careful Using
 
1NETGEAR GS108 V4 8-Port Switch (Only Broadcom chip)기기간 연결이 해제되는 경우 해당포트가 인식불능이 되는 경우가 있으며, 이 문제를 해결하기 위해서는 장치의 재부팅이 필요합니다.
Broadcom chip을 사용하지 않은(ex: Realtek chip) 다양한 버전이 존재하며, 이 경우 DiGiCo 콘솔과 호환성에 문제가 발생할 수 있습니다.
해당 제품의 경우 시리얼넘버의 시작이 3TX가 아닐 경우 Broadcom chip이 사용되지 않은 모델이니 사용시 주의해여 합니다. 
2NETGEAR JGS516 v2 - 16-Port SwitchDiGiCo 콘솔과 사용하는 경우, 콘솔에서 네트워크 설정 변경을 반드시 진행해야 합니다.
https://assets.wavescdn.com/pdf/hardware/digico-sd-consoles-netgear.pdf
 
 
Not Supported with DiGiCo SD consoles.
 
1DLink DGS-1210-10P  
2NETGEAR GS110TP V3 10 port switch 
3TP-Link TL-SG108 (v2.0) 8-port switch 
4TP-Link TL-SG3210 (v3) 8-port switch 


TOP