알림
뒤로

II MZ-280Q

     The MZ-280Q features four individual 280 Watt RMS Class D power amplifiers, each configurable to run 70/100 Volt or at minimum 4 Ohm impedance. Each amplifier powers a zone, which all have front panel controls for volume, two band eq and source select, found on the front panel. There are five flexible input channels, each with a front panel mounted gain trim control. Dual combi microphone inputs allow two individual mics to be connected simultaneously both with auto or manual priority modes. Built in a full size 1U rack case, the unit is extremely robust with easily operable controls. Front 'scribble' strips allow the installer to easily identify each zone and input identification. The perfect installation amplifier for retail, leisure, café, bars and halls.


     MZ-280Q는 280W RMS Class D 파워 앰프 4개를 개별적으로 탑재하고 있으며, 각 앰프는 70/100V 방식 또는 최소 4Ω 임피던스로 운용할 수 있도록 설정할 수 있습니다. 각 앰프는 하나의 존에 전원을 공급하며, 모든 존은 전면 패널에서 볼륨, 2밴드 EQ, 소스 선택을 제어할 수 있습니다. 5개의 유연한 입력 채널이 마련되어 있으며, 각 채널에는 전면 패널에 장착된 게인 트림 컨트롤이 있습니다. 듀얼 콤비 마이크 입력을 통해 두 개의 마이크를 동시에 연결할 수 있으며, 두 입력 모두 자동 또는 수동 우선순위 모드를 지원합니다. 풀사이즈 1U 랙 케이스에 제작되어 매우 견고하며, 조작하기 쉬운 컨트롤을 갖추고 있습니다. 전면의 ‘스크리블’ 스트립을 통해 설치자는 각 존과 입력을 쉽게 식별할 수 있습니다. 리테일 매장, 레저 시설, 카페, 바, 홀 등에 적합한 완벽한 설치용 앰프입니다.


  • 4 Zone amplifier
  • 4x 280 Watts RMS power output
  • Supports 70/100V or min 4 Ohm impedance speaker outputs (configurable per zone)
  • 5 comprehensive audio input channels
  • Independent bass and treble EQ adjustment on each zone
  • Compact space saving 1U design (rack mountable)
  • Universal ~100-240V worldwide operation
  • Remote volume control capability using HH MZ-C2 module and standard ethernet cable

II FEATURES

System Type
Zone power amplifier with input routing
Inputs
CH1/2 balanced XLR/6.3mm jack combi socket, CH3/4 L&R balanced 3.5mm Euroblock, CH5 3.5mm stereo aux and stereo RCA
Outputs
4 zone power amp outputs via 5.08mm Euroblock
Indicators
Power/Standby, Input signal present and peak LEDs, Output signal present and clip LEDs
Controls
Adjustable gain control for each input; source select and volume control for all zones
Frequency Response
20-20kHz ±0.1dBu (LoZ Mode), 80-20kHz ±0.1dBu (HiZ Mode)
THD+N
<0.01% @0dBu in, mid volume; <0.008% @+6dBu in, maximum volume
S/N
>110dB
Noise Floor
< -70dBu (unmuted), < -110dBu (muted)
Crosstalk
< -95dB between channels, maximum volume
Emergency Override
Balanced 3.5mm Euroblock connector, overriding the normal inputs
Lineout
3.5mm Euroblock line level output that follows zone 1, useful for system expansion
Other Controls
CH1/2 Mic/line level, phantom power; high and low impedance settings for each zone; power saving mode and front panel lock
DSP
ORIGIN advanced multicore platform
EQ
Each zone has bass and treble shelving control with a low pass filter mode; switchable high pass filter on CH1/2
Power Consumption
30W Idle, 300W Typical, 650W Max, 0.2W Standby
Unit Dimensions (Hwd)
44 x 483 x 417 mm (1.7" x 19" x 16.4")
Unit Weight
4.9kg, 10.8lbs
Carton Dimensions (Hwd)
150 x 630 x 510 mm (5.9" x 24.8" x 20.1")
Packed Weight
7.6kg, 16.8lbs
Accessories
Rack mounting kit, Euroblock connectors (4x 3.5mm 3 way, 2x 3.5mm 5 way, 2x5.08mm 6 way), IEC mains lead, HH user manual download card


II DOWNLOADS

MZ SERIES INSTALL ZONE AMPLIFIERS, PRE-AMP & CONTROLLERS


The MZ Series is perfect for those needing to control audio for several zones. The range includes 4 zone amplifiers, one pre-amp, and sleek wall controllers in either black or white and available as EU or US standard plates. 

II RELATED PRODUCTS

ZONE CONTROLLERS
더보기

ACCESSORIES
더보기
TOP