알림
뒤로

XE 300

2-way, Bi-amp / Passive, Coaxial Differential Stage Monitors

The XE300 is the definitive, high-performance compact monitor. It features a high-specification 12” (300mm) LF /1.4” exit HF Coaxial Differential Dispersion driver to deliver perfect sound over the artist’s listening plane. The LF driver section has a 3” (75mm) voice coil and efficient motor with an aluminium demodulating ring to minimise distortion, while the HF driver utilises a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm. 


제품 특징
  • Very high-SPL, compact two-way stage monitor
  • Coaxial ‘point source’ performance
  • Differential Dispersion™ technology for consistent coverage
  • Defined, rectangular coverage plane at head-height
  • Complete system with iK42 for consistent high performance
  • Visually-appealing, low-profile plywood enclosures
  • Built-in risers for steeper monitor angle when required
  • Side panel rubber feet for extra protection when up-ended
  • Easy to carry and manoeuvre
  • M8 rigging inserts
제품 적용
  •  Stage monitor




Its unique Coaxial Differential Dispersion technology produces a horizontal coverage pattern which varies from 60° when the performer is directly over the monitor, narrowing to 30° further back. This narrowing delivers a near-rectangular coverage plane at head-height to maintain the sound level and balance independent of distance from the monitor.                             


The XE300 enclosure is constructed from multi-laminate birch ply, with integral ergonomic handles and finished with a hard-wearing paint. A strong, perforated steel grille with an acoustically transparent cloth backing provides protection for the Coaxial Differential Dispersion driver, while moulded feet on the base prevent movement onstage with additional rubber feet on the side panels providing added protection if the monitor is upended when carrying.


Frontal reflex ports couple with the floor to increase LF output and inbuilt risers can be used to increase the monitoring angle for longer-throw applications.


XE Series monitors are designed as a complete system with the iK42 4-channel Class D Amplifier, offering a unique combination of power and audio performance seamlessly combined with advanced DSP, proprietary VU-NET™ software control and Dante™ digital audio networking. State of the art components and a finely optimised design results in generous power reserves that ensures pristine sound quality is maintained even under the most extreme conditions. As well as maximising the capability of the monitor, this ensures that the monitor engineer and artist can be confident that they will experience this same high level of consistent performance from an XE monitor anywhere in the world.


  제품 스펙 (SPECIFICATION)


타입
Two-way,bi-amp/passive, Coaxial Differential Dispersion Stage Monitor
주파수 응답특성(5)
67Hz-18kHz ± 3dB, -10dB @ 55Hz          
드라이브
LF: 12”(300mm) / 3” (75mm) voice coil, dual-gap neodymium motor system
HF:1.4”(35mm) exit / 3” (75mm) voice coil, titanium dome compression driver
RATED POWER
LF: 350WAES, 1400W peak
HF: 80WAES, 320W peak      
최대 SPL
Bi-amp:140dB peak. Passive: 139dB peak        
SYSTEM AMPLIFIER
iKON®iK42
NOMINAL 임피던스
LF/FR: 6Ω
HF: 8Ω
DISPERSION (-6dB)
60-30°horizontal, 90° vertical
CROSSOVER
1.1kHz
엔클로저Birch/beechply and hardwood
마감
Black textured paint
PROTECTIVE GRILLE
Black perforated steel with scrim cloth backing
BAFFLEANGLE
27.5°(40° with risers)
CONNECTORS
2 x NL4 type            
PIN CONNECTIONS(INPUT)
LF/FR:1+/-, HF: 2+/-
FITTINGS
2 x pocket handles
Protective rubber feet on base and sides
Built-in risers
4 x M8 inserts
크기
(W)550mm x (H) 290mm x (D) 470mm
무게
19kg (41.9lbs)

XE Stage monitor 시리즈 제품...


XE300
2-way Bi-amp/Passive,
 Coaxial Differential Dispersion
Stage Monitor



XE500
2-way Bi-amp
 Coaxial Differential Dispersion
Stage Monitor


SOUNDSQUARE

ⓒ 2018 Make.

SITEMAP
SERVICE

02-6673-0370

Mon - Fri AM 11:00 - 17:00

Sat.Sun.Red-Day Off

TOP